EnvoTech MARK II Series for the processing of industrial contaminated waste water

Field of use
Envotech plants clean/separate water of all sorts, where water is the main constituent.

Among others, they are today implemented in the following areas of use:

  • Contaminated water from alkaline degreasing
  • Cooling/lubricating agents
  • Rinsing waters from surface processing
  • Contaminated water that contains oils
  • Teflon and heavy metals wash water

 

    Results
  • The contaminated water is separated into a distillate (clean water) and the remaining waste concentrate, which amounts to only 2-15% of the original quantity.
  • Distilled water is so effectively prepared that it can be used once more or can be released into sewage.
  • The quality of distillates is controlled by Envotech and an independent laboratory. This is achieved through close cooperation with the buyer and in keeping with the ecological regulations that are in force.

Favourable economy
Envotech systems are optimised for minimal use of power, using around 25 kWh per tone of contaminated water.

Detailed basis for deciding
To produce the best possible basis for deciding, detailed investigations are carried out prior to delivery.
Investigations are divided into different phases.

Firstly, a test analysis of waste water of around 1 litre is carried in the EnvoTech laboratory. After this, an investigation is undertaken and the following is ascertained:

  • The purity of the distillate. An analysis from an independent, recognised
    laboratory documents the quality of the treated water
  • It is possible to have an increase in the concentration, or
    the proportion of the concentrates in the contaminated water
  • Further operational parameters, such as the actual capacity

    Furthermore, we are happy to work out the cost-effectiveness in your case. If you have special requests in terms of capacity, materials and the other, we will design a special solution for you.

 

Series EnvoTech MARK II

  • High degree of separation
  • Low energy consumption
  • Clean water which can be used once more,
    or be released into sewage system
  • Compact design and simple installation
  • Uninterrupted, automatic operation
  • Simple maintenance
Examples that demonstrate the advantages of implementing
the EnvoTech systems
  • Volvo personal vehicle AB in Sweden is treated with one EnvoTech Mark II system type 0320 the contaminated water from production that mostly consists of materials for the cooling/lubrication
  • Grundfos A/S Danska has two EnvoTech Mark II 0320 systems. They are directly connected with washing systems that are in operation continuously.
  • Zagrebpetrol has EnvoTech Mark II 0040 system for treatment of water contaminated in the process of chemical cleaning of the tanks. The contaminated water, among other things, contains degreasing agents and oils.
  • Sprut & Brann from Sweden treat the same from alkaline degreasing using the EnvoTech Mark II 0500 system

  • Made from stainless steel
  • Including the separation of oil according to the coalescence principle
  • Including automatic cleaning
  • Built in pumps for contaminated water, concentrate and distillate
  • Frequency regulation of the compressor motor
Technical specifications
Type
0040
0100
0160
0320
0500
Nominal power*
240
600
960
1920
3000
250 days t/years*
40
100
160
320
500
Energy consumption
Work kWh/m3
25
Maximal kwh/m3
5
15
15
35
40
Voltage supply V
3x400 V-50Hz
Dimensions HxLxW cm
125,5x87x190
197x113x215
245x155x265
Weight kg
460
1400
1425
2400
2600
Noise db(A)**
72
75
*All details relate to operation with water
**All systems can be obtained with add-ons













 
         
       
copyright (c) ZAGREBPETROL d.o.o., 2003. shaping NOVENA